KEONN – AdvanReader-10TM USBRFID UHF reader

 

 

AdvanReader-10 i är en liten UHF RFID-läsare med låg vikt, USB-läsare med integrerad antenn (optional)

AdvanReader-10 behöver anslutas till någon form av dator som hanterar lästa taggdata.

AdvanReader-10 är perfekt till IoT applications and other embedded uses where a controller hardware already exists. SDK available for:

• Java
• C#
• C/C++

AdvanReader-10 comes with three models:

• 1 port with embedded ceramic antenna
• 1 port with a SMA connector to operate with any antenna
• 2 ports with the corresponding SMA connectors

AdvanReader-10 benefits:

• high-performance
• small form factor
• lightweight
• with optional embedded antenna
• reduces time and cost of developing RFID systems

Versions:

• 1 port with integrated antenna
• 1 port with connector for external antenna
• 2 ports, with and without enclosure

Specifications:

Air Protocol Interface	EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Supported regions	FCC (NA, SA) 917 MHz – 928 MHz ETSI (EU, IN) 865.6 MHz – 867.6 MHz MIC (KR) 917 MHz – 921 MHz SRRC-MII (P.R.China) 920 MHz – 925 MHz Brazil: 917-927 MHz(by using channel selection) ACMA (AU, NZ) 920 MHz – 926 MHz Open region
RF connections	One 50 ohm SMA connectors (version with 1 port) Two 50 ohm SMA connectors (version with two ports)
RF Power	Programmable from 0dBm to 27 dBm in 0.5 dBm steps (version with 1 port) Programmable from 0 dBm to 302 dBm in 0.5 dBm steps (version with 2 ports)
Max tag read distance	Up to 6 m with 6dBi gain antennas (version with 1 port) Up to 6.5 m with a 6 dbiL antenna (version with 2 ports) (read distance depends highly on tag sensitivity and other factors)
Max tag read throughput	Up to 150 tags/second (version with 1 port) Up to 50 tags/second (version with 2 port)
Data communications	USB comm connector (micro-B)
On-board sensors and actuators	RF amplifier temperature sensor (available through the reader API)
Power consumption	Version with 1 port: Idle consumption < 1 W Max consumption (@27 dBm) < 4.5 W Version with 2 ports: Idle consumption < 3.5 W Max consumption (@30 dBm) < 9.5 W
Temperature	-20 °C to +50 °C
Size without enclosure	67 mm x 67 mm x 10.7 mm (2.64 inches x 2.64 inches x 0.42 inches) (version with 1 port) 82 mm x 68 mm x 15.1 mm (3.23 inches x 2.68 inches x 0.59 inches) (version with 2 ports)
Weigh without enclosure	28 g (0.99 oz) (version with 1 port and connector for an external antenna) 50 g (1.8 oz) (version with 1 port and embedded antenna) 42 g (1.48 oz) (version with 2 ports)

PRODUKTBLAD:  Keonn-AdvanReader-10-Data_sheet.cleaned (2)