RFID läsare – RFID KEONN AdvanReader-60TM
Har du frågor om pris eller funktion?
Kontakta oss för mer info om produkten, dess funktion och användningsområden!
Produktbeskrivning
RFID läsare – RFID KEONN AdvanReader-60
on-board computer and open Linux OS
AdvanReader-60 i är en liten UHF RFID-läsare med låg vikt, och USB HID (tangentbordsemulering) kommunikation samt strömmatning via PoE injector
AdvanReader-60 är perfekt till IoT applications and other embedded uses where a controller varianter med 1 eller hardware already exists.
AdvanReader-60 features:
- High flexibility:
1 port, 27 dBm maximum output power
2 ports, 30 dBm maximum output power - on board computer with fully open Linux OS
- multiple digital inputs and outputs with two analog inputs and one relay output
- small form factor
- acts as HID USB device
- powers up external devices: non-isolated power output: 5 V, 200 mA (DC)
- with multiple LED indicators, on board and for external connection
- on-board buzzer
AdvanReader-60 benefits:
- high-performance: high output power and high sensitivity
- reduces time and cost of developing RFID systems
- can become your own reader, if you put your company logo on the enclosure
Specifications:
Air Protocol Interface | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
Supported regions | FCC (NA, SA) 902 MHz – 928 MHz ETSI (EU, IN) 865.6 MHz – 867.6 MHz MIC (KR) 910 MHz – 914 MHz SRRC-MII (P.R.China) 920 MHz – 925 MHz Brazil: 902-907,5 MHz and 915-928 MHz (by using channel selection) ACMA (AU, NZ) 920 MHz – 926 MHz Open region |
RF connections | One or two 50 ohm SMA connectors for monostatic antennas |
RF Power | Programmable from 0dBm to 27 dBm in 0.5 dBm steps (version with 1 port) Programmable from 0dBm to 30 dBm in 0.5 dBm steps (version with 2 ports) |
Max tag read distance | Up to 9 m (33 feet) with 6dBi gain antennas |
Max tag read throughput | Up to 50 tags/second (version with 1 or 2 ports) |
Data communications | Power over Ethernet (PoE): IEEE 802.3af and 802.3at (Type 1 & Type 2) |
Output power | 5 V @ 200 mA (DC) non-isolated power supply to feed external devices and circuitry |
On-board sensors and actuators | Buzzer |
On-board LED indicators | LED on (white LED) LED status (orange LED) LED M6e Rx line (green LED) LED M6e Tx line (red LED) |
Inputs | 2 x digital/analog inputs, 10 bits resolution Inputs accepted in the range: • 0 V – 3 V (Input 1) • 0 V – 10 V (Input 2) |
Outputs | 4 x digital outputs (higher power): • OUT1, OUT2, OUT3, OUT4 • Non isolated • Maximum output current 100 mA 1 x digital outputs: • OUT5 • Non isolated • Sink up to 8mA 1 x relay output: • OMRON G5V-1 5DC • Max current 1 A • Max voltage: • 24 V (DC) • 125 V (AC) Other outputs : • Loudspeaker: 8 ohm/2 W |
Power consumption | Idle consumption < 3 W Max consumption (@27 dBm) < 7 W (version with 1 port) Max consumption (@30 dBm) < 9 W (version with 2 ports) |
Temperature | -20 °C to +50 °C |
Size without enclosure | 137 mm x 137 mm x 30 mm (5.39 inches x 5.39 inches x 0.95 inches) |
Size with enclosure | 143 mm x 143 mm x 30 mm (5.6 inches x 5.6 inches x 1.19 inches) |
Weigh without enclosure | 180 g (6.35 oz) |
Weigh with enclosure | 510 g (18.4 oz) |
PRODUKTBLAD: Keonn-AdvanReader-60-Data_sheet